Marine Grade Aluminum T Bar
Marine grade aluminum T bar is ofen used for shipbuilding., mainly used in hull structures and generally consists of bottom plates, bottom plates, side plates, bulge plates, bulwarks, decks, bulkheads, hoardings, ribs, brackets, stringers, ribs, keels, rebars, columns and rods.It has above average corrosion resistance, good machinability, and is excellent for welding. Aluminum T-Bar tends to have a sharp 90 right angle in the corners unlike structural that has a radius.
6061 T6 aluminum T bar is heat-treatable, resistant to stress cracking and non-magnetic.
6063-T5 Aluminum T-Bar is excellent for outdoor use and architectural trim due to its superior corrosion resistance.
Marine grade aluminum T Bar Specification:
Alloy: 5083, 5086, 5383, 5059, 6061, 6063,6082,6005A
Temper: H111/H112, T5/T6
Certificate: BV /DNV /ABS/Lioyds
Thickness: 3mm---50mm
| Mechanical Properties of Marine Aluminum T Bar | |||||||
| Alloy | Form | Thickness(mm) | Temper | Rm |
Rp0.2 (Mpa) |
A% Min | |
| Min. | A₅₀ | A | |||||
| 5086 | Shapes, Bar, Tube | 3≤t≤50 | H112 | 240 | 95 | 10 | 12 |
| 5083 | Shapes, Bar, Tube Shapes, Bar, Tube | 3≤t≤50 3≤t≤50 |
H111 O and H112 |
270 270 | 110 125 | 10 10 | 12 12 |
| 5059 | Shapes, Bar, Tube | 3≤t≤50 | H112 | 330 | 200 | 10 | |
| 5383 | Shapes, Bar, Tub | 3≤t≤50 | O | 290 | 145 | 17 | 17 |
| Shapes, Bar, Tub | 3≤t≤50 | H112 | 310 | 190 | 13 | ||
| 6061 | Shapes, Bar, Tube Profiles | 3≤t≤50 3≤t≤50 |
T5 or T6 T5 or T6 |
260 245 | 240 205 | 10 | 8 4 |
| 6005A | Shapes, Bar, Tube Profiles | 3≤t≤50 | T5 | 260 | 215 | 9 | 8 |
| Shapes, Bar, Tube Profiles | 3≤t≤10 | T6 | 260 | 215 | 8 | 6 | |
| 10≤t≤50 | 250 | 200 | 8 | 6 | |||
| 6082 | Shapes, Bar, Tube Closed shapes | 3≤t≤50 3≤t≤50 |
T5 or T6 T5 or T6 |
310 290 | 260 240 | 10 | 8 5 |
| Marine Aluminum T Bar Aluminum Alloys Composition | |||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | Others | Alu | |
| Each | Toal | ||||||||||||
| 5083 | 0.40 | 0.40 | 0.1 | 0.4-1.0 | 4.0--4.9 | 0.05--0.25 | -- | 0.25 | 0.15 | -- | 0.05 | 0.15 | Remainder |
| 5383 | 0.25 | 0.25 | 0.20 | 0.7-1.0 | 4.0-5.2 | 0.25 | -- | 0.40 | 0.15 | -- | 0.05 | 0.15 | Remainder |
| 5086 | 0.40 | 0.50 | 0.1 | 0.2--0.7 | 3.5-4.5 | 0.05-0.25 | - | 0.25 | 0.15 | - | 0.05 | 0.15 | Remainder |
| 5059 | 0.45 | 0.50 | 0.25 | 0.6-1.2 | 5.0-6.0 | 0.25 | - | 0.40-0.9 | 0.20 | - | 0.05 | 0.15 | Remainder |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | 0.15 | - | 0.05 | 0.15 | Remainder |
| 6005A | 0.50-0.9 | 0.35 | 0.30 | 0.50 | 0.40-0.7 | 0.30 | - | 0.20 | 0.10 | - | 0.05 | 0.15 | Remainder |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.20 | 0.10 | - | 0.05 | 0.15 | Remainder |
Marine Aluminum T Bar Mould List:
| Material Code | A(mm) | B(mm) | T1(mm) | T2(mm) | R | G (Kg/m) |
| CAM-513 | 20 | 12.8 | 0.8 | 0.8 | 0.069 | |
| CAM_A001407 | 20 | 20 | 2 | 2 | 0.205 | |
| TP-680 | 22 | 9 | 2 | 2 | 0.157 | |
| CAM_A000935 | 22.5 | 48 | 2.5 | 2.5 | 0.5 | 0.454 |
| TP-59 | 25 | 25 | 1 | 1 | 0.132 | |
| CAM_A000973 | 25 | 25 | 2 | 2 | 0.259 | |
| CAM_A000801 | 25 | 25 | 3 | 3 | 0.381 | |
| TP-170 | 25 | 25 | 3 | 3 | 0.381 | |
| TP-171 | 25 | 40 | 3 | 3 | 0.502 | |
| TP-21 | 25.4 | 31.75 | 0.9 | 0.9 | 0.5 | 0.137 |
| CAM_A000228 | 30 | 30 | 3 | 3 | 0.462 | |
| CAM_D005016 | 33.78 | 23.88 | 1.52 | 2.03 | 0.261 | |
| CAM_A000774 | 35 | 35 | 3 | 3 | 0.543 | |
| ALD_D001980 | 40 | 20 | 1.6 | 1.6 | 0.252 | |
| ALD_D003711 | 40 | 25 | 1.6 | 1.6 | 0.274 | |
| ALD_D001143 | 40 | 40 | 1.6 | 1.6 | 0.339 | |
| CAM_A000520 | 40 | 40 | 3 | 3 | 0.624 | |
| CAM_A000521 | 40 | 40 | 4 | 4 | 0.821 | |
| ALD_D001862 | 40 | 40 | 6 | 6 | 1.199 | |
| CAM_D007940 | 41.28 | 30.15 | 1.57 | 2.29 | 0.351 | |
| ALD_D000071 | 45 | 100 | 8 | 5 | 4 | 2.233 |
| ALD_D003206 | 45 | 100 | 8 | 4 | 4 | 1.984 |
| CAM_A000425 | 50 | 50 | 3 | 3 | 0.786 | |
| CAM_A000229 | 50 | 50 | 4 | 4 | 1.037 | |
| CAM_A000457 | 50 | 50 | 5 | 5 | 1.282 | |
| ALD_D000430 | 50 | 50 | 6 | 6 | 6 | 1.564 |
| ALD_D000068 | 50 | 60 | 6 | 4 | 4 | 1.411 |
| ALD_D002981 | 50 | 60 | 6 | 4 | 4 | 1.412 |
| TP-972 | 50 | 60 | 6 | 4 | 4 | 1.406 |
| ALD_D000069 | 50 | 70 | 8 | 4 | 4 | 1.768 |
| ALD_D002982 | 50 | 70 | 8 | 4 | 4 | 1.768 |
| TP-1043 | 50 | 100 | 5 | 5 | 1.958 | |
| TP-973 | 50 | 120 | 3 | 6.5 | 21.75 | 3.005 |
| CAM_A000782 | 50.8 | 50 | 10 | 10 | 2.425 | |
| CAM_D002496 | 50.8 | 50.8 | 6.35 | 6.35 | 1.633 | |
| CAM_D005299 | 50.8 | 101.6 | 6.35 | 6.35 | 2.504 | |
| CAM_D002830 | 50.8 | 152.4 | 6.35 | 6.35 | 3.375 | |
| CAM_D002890 | 50.8 | 152.4 | 9.35 | 9.35 | 4.981 | |
| CAM_A000903 | 60 | 30 | 4 | 4 | 0.929 | |
| CAM_A000230 | 60 | 60 | 4 | 4 | 1.253 | |
| CAM_A000879 | 60 | 60 | 7 | 7 | 2.136 | |
| CAM_D002394 | 63.5 | 279.4 | 9.53 | 9.53 | 6.35 | 8.62 |
| ALD_D000070 | 80 | 139 | 8 | 5 | 10 | 3.612 |
| ALD_D002984 | 80 | 163 | 8 | 5 | 6 | 3.862 |
| ALD_D000065 | 80 | 208 | 8 | 6 | 2 | 5.006 |
| TP-91 | 100 | 43 | 3 | 3 | 0.5 | 1.134 |
| CAM_A000716 | 100 | 60 | 3.5 | 4 | 3 | 1.566 |
| TP-94 | 100 | 73 | 3 | 3 | 3 | 1.388 |
| CAM_A000950 | 110 | 50 | 1.8 | 1.8 | 0.2 | 0.769 |
| CAM_A001035 | 120 | 50 | 1.8 | 1.8 | 0.2 | 0.817 |
| ALD_D000469 | 250 | 366 | 16 | 12.7 | 10 | 22.917 |
| CAM-751 | 180 | 90 | 15 | 60 | 10 | 19.419 |
| CAM-752 | 180 | 100 | 30 | 60 | 10 | 25.899 |
|
Henan Meisitu trading Co.,ltd.
|
|
Company name: Henan Meisitu Trading Co.,ltd. Tel : +813633857537 Whatsapp : +8613633857537 E-mail : [email protected]
